Logging On - Siemens HiPath 3000 User Manual

3benkonf.fm
First Steps and User Configuration

Logging on

3.4 Logging on
On starting the program, the appropriate configuration data is loaded, and you are presented
with the logon dialog:
When logging on, enter the following data:
Parameter
Call number
Password
Language
Remote Access
The telephone number and the Password are assigned by a systems engineer when
>
configuring HiPath 3000/5000 V4.0.
The Remote Access option must only be activated if optiClient is logged onto a
HG1500.
> Confirm your entries with OK.
When the optiClient 130 is started for a phone number that is already known, the parame-
ters saved for that phone number are read in from the profile file. When starting with a
phone number that is unknown, either the default settings in the profile file are used (if
available), or the settings must be configured immediately at logon by clicking on the Ad-
vanced button (see also the section on Extended Options parameters for details).
3-12
Meaning
Client telephone number
Appropriate password
Select the language for the optiClient 130 user interface. Chose
from the languages installed.
This option must be activated when Remote Access.
Nur für den internen Gebrauch
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual