1. Display
2. Buttons
3. OFFLINE SETTING
4. FIRMWARE
UPGRADE
5. RESET
BUTTON
6. LOCK CATCH
7. DMX IN
8. POWER IN
9. ETHERNET
10. FUSE(T 15A)
11. POWER OUT
12. DMX OUT
13. BOLT
03/ Control Panel
To show the various menus and the selected function
MENU
To enter into move backward or leave the menu
UP
To go backward to move up in the menu
DOWN
To go forward to move down in the menu
ENTER
To perform the desired functions
Used to upgrade fixture's firmware
Used to reset the lock catch
Used for splicing other fixtures
For DMX512 link, use 5-pin XLR cable to link the unit and DMX
controller to input DMX signal (3-pin XLR cable is optional)
To connect to supply power
Transfers fixture's information to a main controller
Protects the unit from damage of over current or short circuit
To connect to the next fixture
For DMX512 link, use 5-pin XLR cable to link the next units to
output DMX signal (3-pin XLR cable is optional)
Used to lock two fixtures
- 8 -