Cure Your Appliance When Needed - EAS Electric EMV72VAP Instruction Manual

CURE YOUR APPLIANCE WHEN NEEDED

If a fault occurs, before calling the after-sales service, please ensure that is not
because of incorrect operations. Refer to the fault table and attempt to correct
the fault yourself. You can often easily rectify technical faults on the appliance
yourself.
If a dish does not turn out exactly as you wanted, you can find many tips and
instructions for preparation at the end of the operating manual.
Fault Possible Cause
The
Faulty fuse
appliance
does not
work.
Knobs have
fallen out of
the support in
the control
panel.
Knobs can
There is dirt
no longer
under
be turned
knobs
easily.
Fan does not work all the
time in the mode: "Fan
Heating"
After a cooking process a
noise can be heard and a air
flow in the near of the control
panel can be observed.
Check the circuit breaker in the fuse box.
Check whether the kitchen light or other
Power
kitchen appliances are working.
cut
Knobs can be removed.
Knobs have
Simply place knobs back in their support in
been
accidentally
the control panel and push them in so that
disengaged
they engage and can be turned as usual.
Knobs can be removed.
To disengage knobs, simply remove them from
the support.
Alternatively, press on the outer edge of knobs
so that they tip and can be picked up easily.
Carefully clean the knobs using a cloth and
soapy water. Dry with a soft cloth.
Do not use any sharp or abrasive materials.
Do not soak or clean in the dishwasher.
Do not remove knobs too often so that the
support remains stable
This is a normal operation due to the best possible
heat distribution and best possible performance
of the oven.
The cooling fan is still working, to prevent high
moisture conditions in the cavity and cool down
the oven for your convenience. The cooling fan
will switch off automatically.
Notes/Remedy
28 V.2