EAS Electric EMV72VAP Instruction Manual page 58

Removing the appliance door
1. Open the appliance door fully.
2.
Fold open the two locking levers on the left and right
3. Close the appliance door as far as the limit stop.
4. With both hands, grip the door on the left- and right-hand side, and pull it out
upwards.
Fitting the appliance door
Reattach the appliance door in the opposite sequence to removal.
When attaching the appliance door, ensure that both hinges are placed
1.
right onto the installing holes of the front panel of the cavity. Ensure that
the hinges are inserted into the correct position. You must be able to
insert them easily and without resistance. If you can feel any resistance,
check that the hinges are inserted into the holes right.
Open the appliance door fully. While opening the appliance door, you
2.
can make another check if the hinges areonto the right position. If you
make the fitting wrong, you will not be able to make the appliance door
fully opened. Fold both locking levers closed again.
Close the cooking compartment door. By the same time, we warmly
3.
recommend you to check one more time, if the door is onto the right
position and if the ventilation slots are not half-sealed .
24 V.2