Before Using The Appliance - EAS Electric EMV72VAP Instruction Manual

B EFORE USING THE APPLIANCE
First using for the first time
Before using the appliance to prepare food for the first time, you must clean the cavity
and accessories.
1. Remove all stickers, surface protection foils and transport protection parts.
2. Remove all accessories and the side-racks from the cavity.
3. Clean the accessories and the side-racks thoroughly using soapy water and a
dish cloth or soft brush.
4. Ensure that the cavity does not contain any leftover packaging, such as
polystyrene pellets or wooden piece which may cause risk of fire
5. Wipe the smooth surfaces in the cavity and the doar with a soft, wet cloth.
6. To remove the new-appliance smell, heat up the appliance when empty and
with the oven doar closed.
7. Keep the kitchen highly ventilated while the appliance is heating up first time.
Keep children and pets out of the kitchen during this time. Close the doar to the
adjacent rooms.
8. Adjust the settings indicated. You can find out how to set the heating type and
the temperature in the next section.
Settings
Heating Mode
Temperature
Time
After the appliance has cooled down:
Clean the smooth surfaces and the door with soapy water and a dish cloth.
1.
Dry all surfaces.
2.
Install the side-racks.
3.
Setting the time
Before the oven can be used, the time should be set.
1. Initially power on, the hour bit "00" flashes, and the hour bit of the clock is adjusted by "
or +/- key.
2. Press " " to confirm, the minute position "00" flashes, adjust the clock minute position by
or +/-, and press "
NOTE:
1. If you need to modify the clock again, please hold the
steps 1 and 2 to complete the modification.
2.The clock has a 24 hour display.
250ºC
2h
" to complete the setting.
key for 3 seconds and refer to
9
"
V.2