EAS Electric EMV72VAP Instruction Manual page 61

CLEANING THE OVEN WITH STEAM
You can use the steam function of your oven to soften stubborn dirt that may
remain inside the appliance for perfect cleaning.
Select the Pure Steam programme
maximum temperature of 100ºC and start the empty oven. After this time,
use a cloth or sponge to carefully remove the residues.
It is very important to dry the oven after each use of the steam functions for
better maintenance of the appliance. You can do this with a cloth, or by using
the Drying function included in the oven.
Change the power cord
Position A show the terminal box position on the back of the back outer case
and it's closed.
Steps:
a. cut off the power, use small fat screwdriver to open the two
snaps (1, 2).
b. use Phillips screwdriver to take off screws 3, 4, 5 and 6.
c. change the new power cord, fix the yellow/green wire on 3,
brown wire on 4, blue wire on 5.
d. twist screw 6 to close the terminal box cover and finish the
changing.
A
back outer case
, with a duration of 10 minutes and a
brown {L}
yellow/green
power cord
blue {N}
27
4
3
1 2
5
6
terminal box
V.2