Applying Memory Cards - Novexx Solutions 64 Series User Manual

02/16 Rev. 04
Memory card and
Printing starts immediately after switching on
Easy-Plug file
1. Name the print job file in the root directory on the memory card autostrt.for.
2. Insert the memory card into the card slot on the printer (see next section).
3. Switch on the rprinter.
The printer processes the print job as soon as it is in online mode.
Alternatively, the print job can be started in standalone mode; for more details, see
topic section "Advanced Applications",

Applying memory cards

The printer of the 64-xx series support the following memory card types:
Flawless functioning of the memory cards is only guaranteed for the types distributed
by NOVEXX Solutions:
[13] CF card (article no. A7681).
[14] SD card (article no. A101465).
Applying CF/SD
„CF/SD cards".
1)
USER MANUAL
• CompactFlash (CF) Typ I [13]
1
• SD [14]
• SDHC
CAUTION! - Observe the following guidelines to avoid damaging the printer or the CF
card.
 Only use CF -cards approved by the manufacturer.
 Always wait at least 5seconds after switching off the printer before removing or
inserting the CF card.
 When inserting or removing the CF card, never use force.
Slim guide notch
Contacts
cards: see Plugin-card manual, topic section „Application", chapter
SD and SDHC cards are supported with firmware version 6.35 or above.
64-xx
Standalone Operation 
Wide guide notch
Basic Operating Procedures
on page 8.
18