Mounting The 64-Xx - Novexx Solutions 64 Series User Manual

02/16 Rev. 04

Mounting the 64-xx

The 64-xx has been designed as a desktop printer, which means that it is normally
mounted in an upright position on a table [2]. Other sufficiently large, level and sturdy
surfaces can also be used as a base.
[6] The correct orientation of the 64-04.
USER MANUAL
WARNING!
When choosing a base for the printer, observe the following guidelines to avoid dan-
gerous operating conditions:
 The base needs to be at least as deep and wide as the printer itself.
 The surface needs to be level, solid and dry.
 The printer's fan and ventilation slits must not be obstructed, as the device may
overheat otherwise.
The printer must not be mounted in the immediate vicinity of other heat sources.

The environmental conditions specified (temperature, air humidity, etc.) need to

be complied with.
The power cable should be run to the printer so that

• nobody will trip on it, and that
• the power plug can easily be pulled out if necessary.
64-xx
Mounting the printer
5