Setting The Realtime Clock - Novexx Solutions 64 Series User Manual

02/16 Rev. 04
Inserting a memory
1. Switch off the printer. Wait for 5 seconds.
card
2. Insert the memory card [15A,B] with the labelled side facing to the right and the
Removing a memory
CF card:
card
1. Switch off the printer. Wait for 5 seconds.
2. Press the eject button slightly in a bit and release it.
3. Press the now protruding eject button completely in to eject the memory card. Re-
SD card:
1. Switch off the printer. Wait for 5 seconds.
2. Press onto the memory card, until it unlocks. Remove the memory card from the

Setting the realtime clock

The realtime clock in the 64-xx printers can be used, for example, to calculate and print
the expiry date of a perishable product.
This is how you set the realtime clock:
1. Navigate to the
2. To enter the date and time, use the Cut button to shift the cursor, the Feed button
Setting parameters: see topic section
the Parameter Menu".
USER MANUAL
contacts facing ahead into the card slot until it clicks into place.
The eject button pops out.
move the memory card.
card slot.
[15] Inserting a memory card (A: CF, B: SD). If the memory card has been inserted correctly, it will sit
flush with the printer's back wall (right).
SYSTEM PARAMETER > Realtime
Realtime clock
dd.mm.yyyy hh:mm
to change the parameter, and the Online button to save it.
64-xx
B
A
Clock.
dd = day, mm = month, yyyy = year, hh = hour, mm =
minute
Info-Printouts and Parameters
Basic Operating Procedures
C
, chapter "Using
19