Table of Contents
Advertisement
The 7226 Storage Enclosure is now prepared for service.
Completing the 7226 Storage Enclosure Service Procedure
Use the following procedure to install the top cover and insert the 7226 Storage Enclosure into the rack.
1. Place the Top Cover on the 7226 Storage Enclosure 1 . Slide it forward 2 until the tabs are fully engaged 3 .
Figure 1. Top Cover
2. Tighten the Top Cover Thumbscrews 1 .
Figure 2. Top Cover Thumb Screws
3. Lift the blue release latches 1 on the slide rails and push the 7226 Storage Enclosure 2 all the way into the rack until it
clicks into place.
Figure 3. Release latches and 7226 Storage Enclosure
64 IBM 7226 Model 1U3 Storage Device Enclosure
Advertisement
Table of Contents
