Chapter 2. Installing The Tape Enclosure; Unpacking The Enclosure And Accessory Cartons - IBM 1 U Installation Manual

Chapter 2. Installing the tape enclosure

This chapter provides information about unpacking the enclosure and accessory
cartons, setting up the enclosure, installing a drive, and installing the enclosure in a
rack.

Unpacking the enclosure and accessory cartons

The following illustrations show the items that come with the IBM 1 U Rack Mount
Tape Enclosure and SCSI accessory kit.
Notes:
1. The illustrations in this document might differ slightly from the hardware.
2. If any items are missing or damaged, contact your place of purchase.
Drive rails (4)
US power
cord
PDU power
cord
Figure 1. IBM 1 U Rack Mount Tape Enclosure option contents.
© Copyright IBM Corp. 2006
Enclosure
Documentation
Rack rail, rear (2)
Power-cable extension (2)
Enclosure slide rail (2)
Rack rail, front (2)
M5 cage nut (10)
M5 clip nuts (10)
M5 x 14 screws (10)
Miscellaneous hardware
3