Unload Button - IBM 7226 Manual

If the green and the amber
Ready Status
LED is...
Green/ Solid Off
Off Amber/ Solid or
Flashing
Flashing/Off Amber/ Solid
Off (7226 drive Amber/ Solid
feature)
Flashing
eServer)
Off Flashing Amber;
once per second
(7226 drive
feature)
Solid/ Flashing
Amber (eServer)
Off Flashing Amber
(7226 drive
feature)
Solid Amber
(eServer)
Off Flashing Amber
(twice per
second)
Off (7226 drive Amber/Solid
feature)
Flashing
(eServer)
Off Flashing Amber
(twice per
second)

Unload Button

The Unload Button ( 1 in
Unload Button
Function
and the SCD
Fault status
is...
LED is...
Off
Displaying an
error code or
Maintenance
Mode Function
Displaying
o
Flashing
selected
function
Displaying error
code
Displaying
c
Off
Flashing
c
Off
Figure 1) performs the following functions:
Table 1. Unload Button Functions
and the SCD
Dot is...
Off The 7226 drive feature and eServer drives are
powered on and in an idle state. The 7226 drive
feature drive will be in this state when powered on
even if no tape is loaded. For the eServer drive, this
state also means a tape is loaded
On/Off The drive is displaying error code(s) from the error
code log on the SCD.
Off/On The Ready Status LED is Flashing while in
maintenance mode for both the 7226 drive feature
and eServer drives. When exiting, the Ready Status
LED is Off on the 7226 drive feature, but is still
Flashing on the eServer.
Off/On The 7226 drive feature drive is executing the
selected function while in maintenance mode. The
Ready Status LED on the eServer drive will be
Flashing while executing the selected function.
Off An error occurred and the drive or media may
require service, or it may require cleaning. Note the
code on the SCD, then go to
Messages
Off The drive needs cleaning.
Off The drive detected an error and is performing a
firmware recovery. It will reset automatically.
Off The drive is requesting a cartridge to be loaded,
which would only be in Maintenance mode.
On There is a drive dump in flash memory.
How to Initiate the Function
IBM 7226 Model 1U3 Storage Device Enclosure 123
Meaning
Error Codes and
to determine the action that is required.