Bypass Mode - Strymon Lex rotary User Manual

Lex
- rotary
Power Up Modes

Bypass Mode

Setting Lex to Buffered Bypass mode preserves the high frequency
response of your instrument's signal through your pedal chain and
long cable runs�
1 Press and hold the ON footswitch while powering up Lex� Once both
LEDs flash, release the footswitch�
2 Turn the VOLUME knob to choose between True Bypass or Buffered
Bypass modes� The ON LED will change color to indicate the current
status as you turn the knob�
• True Bypass:
• Buffered Bypass:
3
Press either footswitch to store the Bypass Mode and begin using
Lex�
NOTE: The Bypass mode setting persists across power cycles and is not
saved per preset�
GREEN (default)�
RED
pg 12