Strymon Lex rotary User Manual page 26

Lex
- rotary
Configuring Lex to Use MIDI
STEP 3 – SET MIDI OUT MODE
1 Press and hold the SLOW/FAST footswitch while connecting power
to the pedal� Once both LEDs flash, release the footswitch�
2 Turn the HORN LEVEL knob to select what kind of MIDI data is sent
from Lex to other MIDI devices� Both LEDs will flash momentarily to
indicate status�
• OFF: RED
• THRU: BLUE
without any additional MIDI messages generated by Lex�
• SEND CC PC OTHER: WHITE - MIDI CC, PC, and SysEx messages
generated by Lex are all sent to the MIDI Out�
• SEND CC OTHER:
ated by Lex are sent to the MIDI Out�
• SEND PC OTHER:
ated by Lex are sent to the MIDI Out�
• SEND OTHER:
sent to the MIDI Out�
3
Press either footswitch to store the MIDI OUT mode and exit�
(default) - No MIDI messages are sent out of Lex�
- Incoming MIDI messages are sent to the MIDI Out
GREEN
PURPLE
AMBER - SysEx messages generated by Lex are
(cont�)
- MIDI CC and SysEx messages gener-
- MIDI PC and SysEx messages gener-
pg 26