Table of Contents
Advertisement
Lex
- rotary
Configuring Lex to Use MIDI
STEP 2 – SET MIDI CHANNEL
3
Turn the SPEED knob to set the MIDI communication channel� The
SLOW/FAST LED indicates status� Your SPEED knob selections are
as follows:
• Channel 1:
• Channel 2:
• Channel 3:
• Channel 4-16:
message, requires 1⁄4" MIDI connection)
Once the SLOW/FAST LED turns BLUE, it will blink until the pedal
receives a MIDI Program Change message� Once a message is
received, the pedal will be set to the MIDI channel that carried the
message and exit the power-up mode to allow you to begin using
Lex�
GREEN
(default)
AMBER
RED
BLUE
(set by next received MIDI Program Change
(cont�)
pg 24
Advertisement
Table of Contents
