Table of Contents
Advertisement
Lex
- rotary
External Control
Configuring MultiSwitch Plus
Configure Lex and MultiSwitch Plus for remote access to three
additional presets�
1
Press and hold the SLOW/FAST footswitch while connecting power to
the pedal� Hold until both LEDs stop blinking�
2
Turn the SPEED knob all the way counter-clockwise to set the MIDI
channel to Channel 1� The SLOW/FAST LED should be GREEN�
3
Turn the HORN LEVEL knob to select any of the following options
(both LEDs will show the following indicated colors):
• Send MIDI CC, PC, and Other Data: WHITE
• Send MIDI CC and Other Data:
• Send MIDI PC and Other Data:
• Send Other Data:
4
Turn the VOLUME knob all the way clockwise to set the EXP/MIDI jack
to MIDI mode� The ON LED should be BLUE�
5
Press either footswitch to exit and store the MIDI channel, the MIDI
OUT setting, and the EXP/MIDI jack mode�
6
Connect a TRS cable to Lex's EXP/MIDI jack�
7
Press and hold the A footswitch on MultiSwitch Plus while con-
necting the TRS cable to MultiSwitch Plus to select Preset mode on
MultiSwitch Plus�
GREEN
PURPLE
AMBER
pg 20
Advertisement
Table of Contents
