Bypass Mode - Strymon DECO User Manual

Deco
- tape saturation & doubletracker
Power Up Modes

Bypass Mode

Setting Deco to Buffered Bypass mode preserves the high frequency
response of your instrument's signal through your pedal chain and
long cable runs�
1 Press and hold the DOUBLETRACKER ON footswitch while power-
ing up Deco� Once both LEDs flash, release the footswitch�
2 Turn the LAG TIME
Bypass or Buffered Bypass modes� The DOUBLETRACKER ON LED
will change color to indicate the current status as you turn the knob�
• True Bypass:
• Buffered Bypass:
3
Press either footswitch to store the Bypass Mode and begin using
Deco�
NOTE: The Bypass Mode setting persists across power cycles and is not
saved per preset�
(BYPASS MODE) knob to choose between True
GREEN (default)�
RED
pg 18