Table of Contents
Advertisement
Lex
- rotary
Factory Reset
Performing a Factory Reset restores the pedal to its factory default
Power-up modes and secondary functions, and replaces all stored pre-
sets with their factory default settings�
1
Press and hold the ON footswitch while connecting power to the pedal�
Once both LEDs flash, release the footswitch�
2
Sweep the MIC DISTANCE knob from 0-100% and back two times�
The SLOW/FAST LED will change colors at the extremes of the knob
range and blink
• TURN 1:
AMBER
• TURN 2:
RED
• TURN 3:
AMBER
• TURN 4: Both LEDs flash RED, Lex resets and restarts�
RED
to indicate when the reset is taking place�
pg 30
Advertisement
Table of Contents
