Lex
- rotary
Live Edit Functions
Cab Filter
Optimizes the output signal for use either into the front of a guitar am-
plifier or a full range speaker system�
1
Press and hold the ON footswitch to enter Live Edit mode� Once both
LEDs flash, release the footswitch�
2
Turn VOLUME
LEDs light to indicate your selection:
• Left for Guitar Amp (GREEN, default)
• Right for Full Range System (RED), such as studio monitors or an
FRFR amplifier system� Full range mode is also useful for direct
recording�
3
Press the ON footswitch to exit and store your Cab Filter setting�
NOTE: The Cab Filter setting is saved per Favorite setting or per MIDI preset�
(CAB
FILTER) to choose the Cab Filter setting� Both ON
pg 8