Lex
- rotary
MIDI Functionality
Saving Presets in MIDI Mode
When in MIDI mode, the currently loaded settings can be saved to any of
Lex's 300 preset locations at any time�
1
To enter Save mode, press and hold BOTH footswitches� Both LEDs
will blink
GREEN
Program Change message�
2
To save the current state of the pedal to the currently loaded pre-
set location, press and hold the SLOW/FAST footswitch until the LED
lights BLUE�
To save the current state of the pedal to any preset location, send
the unit a MIDI Program Change on Lex's currently selected MIDI
channel� For example:
• Send MIDI Program Change #10 to save the preset to the corre-
sponding memory location on the pedal�
• To recall this preset, send MIDI Program Change #10 from your
MIDI controller or sequencer�
NOTE: Press the ON footswitch to cancel the save operation�
(cont.)
to indicate that Lex is waiting to receive a MIDI
OR
pg 27