DIG
- Dual Digital Delay User Manual
Bypass Modes
DIG is set up for True Bypass from the factory. To change to Analog
Buffered Bypass mode with delay trails, hold down the BYPASS switch
while powering up. Repeat this process to revert back to True Bypass.
TRUE BYPASS
Our True Bypass circuit is
simply a mechanical relay to
switch the input signal directly
to the output, with absolutely
no components attached.
BUFFERED BYPASS
Our high-quality Analog Buffered Bypass
circuit features a 1Meg input impedance,
keeping the character of your guitar pickup
unaltered. The output impedance is 100
Ohms and can drive hundreds of feet of cable
without coloring your sound. This mode also
enables delay trails, allowing your delay to
persist even after bypassing the effect.
HOLD BYPASS while powering
up to change Bypass Mode
®
pg 8