Power Up Modes; Input Level - Strymon Lex rotary User Manual

Lex
- rotary

Power Up Modes

Input Level

Selects the input level that is routed to the effect processing�
1 Press and hold the ON footswitch while powering up Lex� Once both
LEDs flash, release the footswitch�
2 Turn the SPEED knob to select the Input Level mode� The SLOW/
FAST LED will change color to indicate the current status as you
turn the knob�
• Instrument:
strument level source, such as a guitar or bass�
• Line: RED
keyboard or synthesizer� 10dB of headroom is added�
3
Press either footswitch to store the Input Level setting and begin
using Lex�
NOTE: The Input Level setting persists across power cycles and is not saved
per preset�
GREEN
(default) - Input headroom is set for an in-
- Input level is set for a line level source, such as a
pg 11