Table of Contents
Advertisement
Lex
- rotary
Live Edit Functions
Use the following steps to enter Live Edit mode and access the second-
ary functions of the controls� Any of the following secondary functions
can be edited while in Live Edit mode�
Bi-Amp Output Mode
Allows you to enable Bi-Amp Output mode rather than the default stereo
output� When in Bi-Amp Output mode, the Left output is the woofer
signal and the Right output is the horn signal�
1
Press and hold the ON footswitch to enter Live Edit mode� Once both
LEDs flash, release the footswitch�
2
Turn the SPEED (BI-AMP) knob to choose Stereo or Bi-Amp mode�
Both LEDs light to indicate your selection:
• Left for Stereo: (GREEN, default)
• Right for Bi-Amp: (RED)
3
Press the ON footswitch to exit and store your Bi-Amp setting�
NOTE: The Bi-Amp Ouptut Mode setting is saved per Favorite setting or per
MIDI preset�
pg 7
Advertisement
Table of Contents
