Midi Clock Sync - Strymon Lex rotary User Manual

Lex
- rotary
Live Edit Functions

MIDI Clock Sync

Selects whether Lex's Speed will sync to incoming MIDI Clock
messages�
1 Press and hold the ON footswitch� Once both LEDs flash, release the
footswitch�
2 Set the position of the RAMP switch to select whether Lex will sync to
incoming MIDI Clock messages� Both LEDs will momentarily change
color to indicate the current status as you set the switch�
• Set the switch down to fast for Off (default): both LEDs light
Lex will not respond to MIDI Clock�
• Set the switch up to slow for On: both LEDs light
respond to MIDI Clock�
NOTE: When synced to MIDI Clock, the LEDs will light PINK, and the SPEED
knob will act as a multiplier or divider of the incoming clock tempo� The
synced SPEED multi/div settings are: 1/4 (min), 1/3, 1/2, x1 (at 12 o'clock), x2,
x3, x4 (max)�
3 Press the ON footswitch to exit and store your MIDI Clock setting�
NOTE: The MIDI Clock setting is saved per Favorite setting or per MIDI preset�
RED -
BLUE - Lex will
pg 9