Table of Contents
Advertisement
Connecting the Camera to a PC
Use the interface serial cable bundled with the RDC-5300 to connect it to a personal
computer.
q Turn off the PC.
w Turn off the camera.
e Connect the camera and the PC using the interface cable.
Note
• Avoid operating the camera on battery power during connection to PC. If
possible, run it via an AC adapter. Otherwise if the power shuts off while
you are operating the camera, you would have to retry.
• Do not connect or disconnect the AC adapter to or from the AC outlet while
the camera is turned on.
Typical Windows connection
Typical Macintosh connection
The above diagrams illustrate typical connections to the Ricoh digital camera RDC-
5300.
r Turn on the camera and set the mode
dial to [PC].
t Turn on the PC and run the utility
software.
5
101
Advertisement
Table of Contents
