Table of Contents
Advertisement
Changing the flash mode
q Set the Mode dial to [
w Press the Flash button to select the flash
mode (
•
•
The flash mode will change each time the Flash
mode button is pressed.
The flash mode will be displayed on the LCD
panel and LCD monitor. In the Auto Flash mode,
however, the
mark will be displayed only on
the LCD monitor. This mark will not be displayed
on the LCD panel.
e Press the release button to take the
photograph.
• When the flash fires, the flash lamp (red)
Note
will light when the release button is
pressed lightly.
• When the flash is being recharged, the
flash lamp will flash and the display will
disappear from the LCD monitor.
Photographs cannot be taken at this
time.
How to Cancel a mode
Press the Flash button and switch to another mode.
].
Light •
Blink).
3
１２
１８００×１２００ Ｎ
55
Advertisement
Table of Contents
