Table of Contents
Advertisement
Erasing a File (Image)
This section explains how to erase recorded files. There are three ways to erase files:
(1) erase, one selected file is erased at a time
(2) erase all, all files are erased at once, and
(3) format, files on a SmartMedia memory card that have been used on another device
are erased and the card is formatted for use with this camera.
Note
• Files on a write-protected SmartMedia memory card cannot be erased
unless the write protect pad is removed from the card. See "Protecting
Against Accidental Writing" (p.31).
Only the pictures that have been taken with this camera can be erased.
• Depending on the SmartMedia capacity, it may take a short time to erase
a file after turning on the power or changing the mode dial.
Operation Flow
To erase image files, follow the steps below:
Turn on the Camera
Slide the power switch on and set the mode dial to [ERASE].
Switch To the Erase Mode
Set the mode dial to [
Select a source file to erase
Select the internal memory or the SmartMedia of the source file to erase.
See "Inserting a SmartMedia Memory Card" (p.32)
Select the Erase Mode
Select the modes from Erase, Erase All Images, Erase Selected
Files (Images).
Select a File
Select a file for the modes of Erase, Erase Selected Files (Images).
Erase
Erase a file.
See:
"Erase" (p.95)
"Erase All Images" (p.96)
"Erase Selected Files (images)" (p.97)
94
].
Advertisement
Table of Contents
