Table of Contents
Advertisement
Changing the White Balance Mode
The white balance mode adjusts the white balance so that you can capture your
subject in its natural colors regardless of the light source. The auto mode will suffice in
most situations.
The auto mode automatically adjusts the white balance based on the white areas,
ensuring that white is reproduced as white regardless of the light source.
Consequently, a subject that lacks in white tones as a whole or that is dominated by
dark tones may not achieve an appropriate white balance. Change the white balance
mode to shoot such subjects.
Switching White Balance Modes
The mode screen will change in the following sequence as you switch the white
balance mode:
オー トモード （表示なし）
Auto Mode (no display)
１８００×１２００ Ｎ
Fluorescent Light Mode
* The factory default setting is auto mode.
Subjects Difficult to Correct in Auto Mode
• Monochrome objects
• Objects lit by multiple light sources
Changing the White Balance Mode
q Set the mode dial to [
MENU button.
The record menu will be displayed.
• To cancel the operation, press the
Note
MENU button.
Daylight Mode
太陽モード
１２
蛍光灯モード
１２
１８００×１２００ Ｎ
] and press the
Cloudy Mode (Overcast Mode)
１２
１８００×１２００ Ｎ
Tungsten Light Mode
白熱灯モード
１２
１８００×１２００ Ｎ
曇天モード
１２
１８００×１２００ Ｎ
59
3
Advertisement
Table of Contents
