Shooting (Still Picture Mode) - Ricoh RDC-5300 Operation Manual

Ricoh digital camera operation manual model number: rdc-5300
Hide thumbs Also See for RDC-5300:
Table of Contents

Advertisement

Shooting (Still Picture Mode)

Basic shooting instructions are given below. Hold the camera correctly to keep it
steady.
q Aim the camera at your subject.
Set the wide angle and use macro mode to
shoot subjects closer than 40 cm (15.8 inches).
"Macro Shooting (Close-up Shooting)"
See
(p.73)
w Press the ▼ or ▲ button to set the size
of the subject.
"Setting the Size of the Subject (Zoom)"
See
(p.46)
"How to View Images on the LCD
Monitor" (p.47)
e Press the shutter release button lightly
with your fingertip.
The shutter release button works in a two-step
action. When you press it lightly (halfway), the
autofocus function is triggered to focus on the
subject automatically. Keep the camera as
steady as possible during this step to ensure
correct focusing.
The AF indication LED (green) will light when
the subject is in focus. The focus, exposure and
white balance settings are set at this point.
When the flash lamp lights
When the flash fires while taking photographs in
dark places, etc., the flash lamp will light red
when the release button is pressed lightly.
During charging, the flash lamp will blink and
the display on the LCD monitor will disappear.
Photographs cannot be taken at this time.
48
1800x1200 N
1800x1200 N
I N T E R V A L
1 2
1 2

Advertisement

Table of Contents
loading

Table of Contents