Table of Contents
Advertisement
Changing the Flash Mode
q Set the mode dial to [
w Press the flash mode button to select a
flash mode.
You can choose Flash Off (
Forced Flash ( ), or Slow synchro mode
( : flashing).
The selected mark will be displayed on the
LCD monitor or on the LCD panel.
e Press the shutter release button to
record the image.
Using the Self-Timer
q Set the mode dial to [
w Press the self timer button.
The self timer is now set.
The
mark will be displayed on the LCD
monitor or on the LCD panel.
e Press the shutter release button to
record the image.
The self timer LED will start flashing and the
shutter will be released after a delay of
about 10 seconds.
Playback
Playing Back Files
q Slide the power switch on and set the
mode dial to [
w Press the CARD/IN button to select the
playback destination.
e Press the ▼ or ▲ button to select a file
you wish to view
* The multi-image and zoom playback features allow
you to view several image files at once or magnify an
image. (p.80, 81)
22
].
), Auto ( ),
(p.61-62)
].
(p.78-79)
].
(p.54-56)
１２
１８００×１２００ Ｎ
メニュー
１２
１８００×１２００ Ｎ
Advertisement
Table of Contents
