Table of Contents
Advertisement
Erase
The selected file is erased.
Important
• Remember that files cannot be restored once they are erased. Before
Note
starting to erase a file, make sure that you want to erase it.
q Set the mode dial to [ ] and press the
CARD/IN button to select a source file to
be erased.
An erase menu is displayed.
w Press the ▼ or ▲ button to select
[ERASE SINGLE IMAGE] and press the
ENTER button.
The erase single image menu is displayed.
Note
• To cancel the operation, set the mode
dial to another mode.
e Press the ▼ or ▲ button to select an
image file to erase.
Note
• To cancel the operation, press the
MENU button. The erase menu is
displayed.
r Press the shutter release button.
The image file selected is erased. If you want to
erase more files, repeat steps e and r above.
t Press the MENU button.
The erase menu is displayed again. Then, turn
the mode dial to select another mode.
Note
• When a lower numbered file is erased, the higher numbers are reassigned.
• Erasing may take longer with some types of SmartMedia memory cards
and files.
• Files which have been set in Protect mode or Secret mode cannot be
erased until they are unprotected. See "Protecting a File" (p.83).
[ E R A S E ]
M E N U
E R A S E
S I N G L E
I M A G E
E R A S E
A L L
I M A G E S
E R A S E
S E L E C T E D
I M A G E S
S E L . : E N T E R
E R A S E
E R A S E
S I N G L E
S I N G L E
I M A G E
I M A G E
S T A R T
S T A R T
: R E L E A S E
: R E L E A S E
C A N C E L : M E N U
C A N C E L : M E N U
4
5 / 1 2
5 / 1 2
95
Advertisement
Table of Contents
