Protecting A File - Ricoh RDC-5300 Operation Manual

Protecting a File

You can protect valuable files from being erased accidentally.
Important
• Formatting the SmartMedia memory card will erase protected, as well as
Note
unprotected, files.
• The protect mark will not be displayed when the SECRET mode is set.
q Set the mode dial to [
MENU button.
The play menu will be displayed.
• To cancel the operation, press the
Note
MENU button.
w Press the ▼ or ▲ button to select
[PROTECT] and press the ENTER button.
The setup menu will be displayed.
Note
• To cancel the operation and return to
the play menu, press the MENU
button.
e Press the ▼ or ▲ button to select the
file you wish to protect and press the
ENTER button.
The selected file will be protected and the
mark will be displayed. If you keep the setting,
repeat step e.
r Press the MENU button to cancel the
protect setting.
The screen returns to the play menu. Press the
MENU button again to cancel the operation.
Note
• Protected files cannot be erased until the protection setting is cancelled.
• Files displayed in multi-image playback mode cannot be protected.
Switch to a single-image mode to carry out protection setting. See "Multi
Image Playback" (p.80).
] and press the
4
83