Set Up The Byteblastermv Download Cable In The Quartus Ii Software - Altera APEX DSP Development Kit User Manual

Appendix
Set Up the
ByteBlasterMV
Download
Cable in the
Quartus II
Software
f
Altera Corporation
APEX DSP Development Kit Getting Started User Guide
9. Use Browse (...) to specify the full directory path to the win2000.inf
file (for example, \quartus\drivers\win2000) and click OK.
10. In the Digital Signature Not Found dialog box, click Yes.
11. In the Select a Device Driver dialog box, select ByteBlasterMV and
click Next.
12. In the Start Hardware Installation dialog box, click Next.
13. In the Digital Signature Not Found dialog box, click Yes.
14. In the Completing the Add/Remove Hardware Wizard dialog box,
click Finish.
15. To restart your computer, click Restart Now.
To set up the ByteBlasterMV parallel port download cable in the
Quartus II software for device configuration or programming, follow
these steps:
1. Open the Quartus II Programmer:
v
Choose Open Programmer (Processing menu).
or
v
Choose New (File menu). Click the Other Files tab, select
Chain Description File, and click OK.
2. In the Programmer window, under Programming Hardware, click
Setup. The Programming Hardware Setup dialog box displays.
3. Click Add. The Add Hardware dialog box displays.
4. In the Hardware Type list, select ByteBlasterMV.
5. In the Port list, select the appropriate port.
6. Click OK.
For more information about the ByteBlasterMV parallel port download
cable, refer to the ByteBlasterMV Parallel Port Download Cable Data Sheet.
3
27