Software Installation; Installing The Quartus Ii Limited Edition Software (Included With The Starter Version Only); Installing The Megacore Functions & Reference Designs/Labs - Altera APEX DSP Development Kit User Manual

APEX DSP Development Kit Getting Started User Guide
f
Software
Installation
14
Refer to the Quartus II Limited Edition readme file for additional
installation, memory, and disk space information.
The APEX DSP development kit contains the Quartus II Limited Edition
software (starter version only), the DSP Builder for use with the MATLAB
and Simulink software, evaluation MegaCore functions that support the
OpenCore Plus feature, and reference designs/labs.
Installing the Quartus II Limited Edition Software (Included with
the Starter Version Only)
Follow these instructions to install the software:
1. Insert the Quartus II Limited Edition Development Software
CD-ROM into your CD-ROM drive. The Setup program starts
automatically and guides you through the installation process.
1
If the Setup program is not already running, you can start it
manually. Choose Run (Windows Start menu), type the
following command, and click OK:
<CD-ROM drive>:\install.exe r
2. Click the Install Quartus II Limited Edition Software button.
3. After the software finishes installing, you must request and install a
license to enable it. See
information.
Installing the MegaCore Functions & Reference Designs/Labs
To install the MegaCore functions and reference designs:
v
Insert the APEX DSP Development Kit CD-ROM into your
CD-ROM drive. The installation program runs automatically.
The MegaCore functions with the OpenCore Plus feature and the
reference designs/labs are installed.
structure.
"Set Up Licensing" on page 16
Figure 1 shows the directory
Getting Started
for more
Altera Corporation