Set Up Licensing; Install The Starter Kit License - Altera APEX DSP Development Kit User Manual

APEX DSP Development Kit Getting Started User Guide
f
Set Up
Licensing
16
Refer to the DSP Builder Quartus II & MATLAB/Simulink Interface User
Guide for information on the DSP Builder directory structure.
The DSP Builder Quartus II & MATLAB/Simulink Interface User Guide
also includes a tutorial that describes how to create a design in Simulink
and then convert it to VHDL for synthesis, Quartus II compilation, and
RTL simulation. See page 18 in the user guide.
Before using the Quartus II Limited Edition software (starter kit only),
DSP Builder, or the OpenCore Plus feature of the evaluation MegaCore
functions, you must request a license file from the Altera web site at
http://www.altera.com/licensing
request a license file, Altera e-mails you a license.dat file that enables the
software.
To obtain a license, perform the following steps:
1. Point your web browser to the Altera web site at
http://www.altera.com/licensing.
2. Click the APEX™ DSP Development Kit Licensing - Starter Version
or APEX™ DSP Development Kit Licensing - Professional Version
link, depending on which version of the kit you have.
3. Follow the on-line instructions to request your license. A license file
is e-mailed to you.
4. To install your license, continue to
"Install the Professional Kit
have.

Install the Starter Kit License

Before installing your license, close the following software if it is running
on your PC:
– Quartus II
– MAX+PLUS II
– MATLAB and Simulink
– LeonardoSpectrum
– Synplify
– ModelSim
To install your license, perform the steps for your platform.
and install it on your PC. When you
"Install the Starter Kit License"
License", depending on which kit you
Getting Started
or
Altera Corporation