Getting Started; Verify Kit Contents; Set Up The Daughter Card - Altera Nios Ethernet User Manual

Verify Kit
Contents
Set Up the
Daughter Card
f
Altera Corporation
This section explains how to set up the Nios EDK daughter card, install
the Nios EDK files, load the hardware reference design into the board and
run the Ethernet application examples.
Verify the following items are included in your Nios Ethernet
Development Kit:
I
Nios EDK daughter card based on the SMSC LAN 91C111
PHY/MAC chip
I
Male-to-male RJ-45 network cable
I
Female-to-male crossover adapter, used for direct-PC connection
I
Nios EDK CD-ROM
I
O'Reilly Internet Core Protocols Manual
I
Nios Ethernet Development Kit User Guide
The hardware reference designs included with the Nios EDK assume the
daughter card is connected to the prototype connectors JP8, JP9, and JP10
on the Nios development board and that your board is already set up.
If you are setting up your Nios development board for the first time, see
the Nios Embedded Processor Getting Started User
1. Verify that your Nios board is set up correctly and the power is off.

Getting Started

Guide.
2
13