Install The Dsp Builder - Altera APEX DSP Development Kit User Manual

Getting Started
Figure 1. APEX DSP Development Kit Directory Structure
MegaCore
fir-v2.3.0
Contains the FIR compiler MegaCore function files and documentation.
rs-v3.2.0
Contains the Reed-Solomon MegaCore function files and documentation.
intlv-v1.0.0
Contains the symbol interleaver/deinterleaver MegaCore function files and documentation.
fft-v1.1.0
Contains the FFT MegaCore function files and documentation.
nco-v1.3.0
Contains the NCO compiler MegaCore function files and documentation.
dsp_development_kit-v1.0.0
Contains the APEX DSP Development Kit documentation, example designs, and reference design.
doc
Contains the documentation provided with the kit. including data sheets, application notes, white papers
and third-party component documentation.
labs
Contains the labs provided with the kit.
filtering
Contains the filtering lab, windows application, and documentation.
reedsolomon
Contains the Reed-Solomon lab, windows application, and documentation.
reference_design
Contains the reference designs provided with the kit.
dsss
Contains the direct sequence spread spectrum (DSSS) reference design, windows application,
and documentation.
Altera Corporation
APEX DSP Development Kit Getting Started User Guide

Install the DSP Builder

Follow these instructions to install the DSP Builder:
1. Insert the DSP Builder: Quartus II & MATLAB/Simulink Interface
CD-ROM into your CD-ROM drive. The installation program runs
automatically.
1
If the installation program does not run automatically,
perform the following steps to run it manually.
a. Choose Run (Windows Start menu).
b. Type <CD-ROM drive>:\DSPBuilder.exe in the
Open box.
c. Click OK. The installation program opens.
2. Follow the instructions in the installation program.
2
15