Figure 22: Geofences Window - Iridium NAL SHOUT ns User Manual

 The ID column indicates the identifier assigned to the geofence. This identifier is used
to reference the geofence when the SHOUT ns sends arrival and departure notices and
when updating geofence parameters via AT commands or remote updates.
 The Options column shows a combined bit field value of the options parameters (000
(0) – 111 (7), with each digit corresponding to Enable, Arrive notice, and Depart notice).
 The Profile column indicates the tracking profile assigned to the geofence.
Descriptions of the geofence settings listed on the right side of the window are as follows.
 ID: Defaults to an incremented integer value. It can be set to any 8-character string to
identify the geofence (e.g., "USA", "BASE", and "DANGERZN").
 Enable: Enables this specific geofence.
 Arrive notice: Sends a NAL format GPS version 6 tracking report with short code 18
(GPS Report Version 6 Format [2]) when entering this specific geofence.
 Depart notice: Sends a GPS version 6 tracking report with short code 19 when exiting
this specific geofence.
 Profile: Sets a tracking profile to be used while inside this specific geofence.
Document Number: 451-01037-001D

Figure 22: Geofences Window

SHOUT ns/nsx User Guide Version D
58 of 91