Configure Window - Iridium SHOUT ns General Description Manual

6. On the Bluetooth Ports properties, a list of any nearby SHOUT ns devices with
Bluetooth activated is shown (see Figure 6). Find and select the desired SHOUT ns
device, and click Pair to pair the device to SatTerm. When paired, SatTerm will output
"PAIRING COMPLETE" to state it has successfully paired the device. If the SHOUT ns
device is not shown, check that Bluetooth is on and click the refresh button to search
for the device again.
7. Next, click on your SHOUT ns device from the Paired Bluetooth list (see Figure 7), and
click the OK button to connect. If connect is a successful, the window will close and
SatTerm is properly connected to the SHOUT ns.

6.2.2 Configure Window

SatTerm Configure Window option allows users to setup of the profiles described in Section
6.1 Profile Descriptions.
After the hardware setup is completed using the steps above, select Options > Configure
Windows... to configure the specific settings for the SHOUT ns (see Figure 8). Each part of
the Configuration window is described below.
NAL Research Corporation (451-01001.B)
Figure 7. Bluetooth Port Properties Paired.
31