Figure 7: Bluetooth Port Properties Paired - Iridium NAL SHOUT ns User Manual

4. Attach the SHOUT ns to the computer's USB port. The SHOUT ns must be connected to
USB for first-time pairing.
5. Use the Options > Properties menu to configure the communications port settings (see
Figure 5). The default should be set to USB for the SHOUT ns. Select Options >
Properties > Set Port Properties. This option sets the computer's communication
parameters to communicate with a connected and powered SHOUT ns. If the Bluetooth
port is not already selected, go to the Connect Using dropdown list and select BT.
6. On the Bluetooth Port Properties window, a list of any nearby SHOUT ns devices with
Bluetooth activated is displayed (see Figure 6). Select the desired SHOUT ns device and
click Pair to pair the device to SatTerm. When paired, SatTerm displays PAIRING
COMPLETE to indicate it has successfully paired the device. If the SHOUT ns device is
not displayed, verify that Bluetooth is on and click the refresh button to search for the
device again.
7. Click your SHOUT ns device from the Paired Bluetooth list (see Figure 7) and click OK to
connect. If the connection is a successful, the window closes and SatTerm is properly
connected to the SHOUT ns.
Document Number: 451-01037-001D

Figure 7: Bluetooth Port Properties Paired

SHOUT ns/nsx User Guide Version D
36 of 91