Status Leds; Figure 3: Control Buttons And Status Leds On The Shout Ns Front Face - Iridium NAL SHOUT ns User Manual

2.4 S LED
TATUS
The SHOUT ns has six status LEDs, as shown in Figure 3, which include: power
(BATT), GPS fix (GPS), Bluetooth state (BT), transmission status (STAT), and Iridium signal
(IRDM). They provide a quick visual check to ensure proper operations. Each LED can be
enabled and disabled through a setting in the general configuration profile (^LEDS) (see section
5.2.2.1 General Profile Settings). Table 1 below describes the function of each LED.

Figure 3: Control Buttons and Status LEDs on the SHOUT ns Front Face

Label Name
Power Device is off
During operation:
BATT Battery  Charge
GPS off or time
GPS GPS
only
Document Number: 451-01037-001D
S
Table 1: Description of LED States
LED Off
Once every 5 sec: Device is on
and sleeping in normal mode
Once every 2.5 sec: Device is on
and sleeping in emergency
mode
During operation:
 Charge under 80%;
1.25 sec on, 0.25 sec off
 Charge under 20%;
0.125 sec on, 1.00 sec off
required
While charging:
 Charge in progress;
1.25 sec on, 0.25 off
2-D fix or dead reckoning
SHOUT ns/nsx User Guide Version D
LED Blinking
, battery level
LED Solid
Device is on and
awake
During operation:
 Charge over
80%
While charging:
 Charge
complete
3-D fix
18 of 91