Figure 16: Tracking Profile Window With Tracking Tab - Iridium NAL SHOUT ns User Manual

Figure 16: Tracking Profile Window with Tracking Tab

5.2.2.2.1 T
RACKING
The Tracking tab has eight settings: Report Flood, Blocked Invalid Reports, Queue Failed
Reports, Queue Restricted Reports, Motion Enabled, Callable, Skip Reporting when Stationary,
and Iridium Allowed.
 Report Flood: Sets the number of tracking reports that are to be transmitted
continuously when first entering tracking mode and when the tracking mode changes
(for example, from normal to emergency). After the specified tracking reports have
been transmitted, the preprogrammed reporting interval takes effect. If in the
emergency tracking mode, the report flood is ended prematurely if an emergency
acknowledgement is received.
o The AT command associated with this setting is ^RF.
 Block Invalid Reports: When this setting is enabled, only tracking reports with a valid
GPS position fix are transmitted. This can be useful in filtering out possibly misleading
GPS data points.
o The AT command for this setting is ^BIGR.
Document Number: 451-01037-001D
T
AB
SHOUT ns/nsx User Guide Version D
48 of 91