Figure 23: Create/Edit Geofence Window - Iridium NAL SHOUT ns User Manual

At the bottom of the Geofences window is a set of buttons. Descriptions of the buttons are as
follows:
 Configure: Selecting the Configure button saves the list of geofences on the SHOUT ns.
 Delete: Deletes the selected geofence.
 Clear: Deletes all configured geofences.
 Create Geofence: Opens a window to create a geofence by adding points on a map.
The window is shown in Figure 23.
o Clicking anywhere on the map adds a point to the geofence. Each point is
connected to its previous point.
o Clicking an existing point deletes it from the geofence.
o Dragging an existing point moves that point to where it is dragged.
o A geofence is complete when the start point is clicked.
o The Save Points button transfers the marked points to the coordinates list and
closes the map.
o The Clear/Reset button clears all points on the map.
Document Number: 451-01037-001D

Figure 23: Create/Edit Geofence Window

SHOUT ns/nsx User Guide Version D
59 of 91