Figure 6: Bluetooth Port Properties Window Unpaired - Iridium NAL SHOUT ns User Manual

5.2.1.2 C
ONNECTING WITH
This section describes how to connect and pair the SHOUT ns to SatTerm via Bluetooth.
Connecting to Bluetooth is also done through the Port Properties window. The Bluetooth port
properties window (see Figure 6) has several buttons, which function as follows:
 Refresh icon: Refreshes the connections list and searches for a SHOUT ns device.
 Pair: Pairs a selected device from the Unpaired Bluetooth list.
 Unpair: Unpairs the selected from the Paired Bluetooth list.

Figure 6: Bluetooth Port Properties Window Unpaired

The procedure is similar to connecting to USB, but requires Bluetooth capabilities on the PC.
Follow the steps below to connect the SHOUT ns to SatTerm using Bluetooth.
1. Use the Options > Properties menu to configure the modem type. Select Options >
Properties > Device Type > SHOUT ns. This option selects the type of device connected
to the computer. Only NAL Research's devices appear on the list.
2. Clear the checkbox "Connect when device is present" in SatTerm's icon bar.
3. Verify that the device's Bluetooth is turned on by pressing and holding the BT button
for 2 seconds. The BT LED should blink, indicating that it is ready for pairing.
Document Number: 451-01037-001D
B
LUETOOTH
SHOUT ns/nsx User Guide Version D
35 of 91