Call Out - Iridium NAL SHOUT ns User Manual

Table of Contents

Advertisement

o The minimum number of points in a geofence is 3 and maximum number of points
is 50.
Note: The Create Geofence option utilizes Google Maps. An internet connection is
required for the map to appear.
 Edit Geofence: Opens a window to edit the coordinates of the selected geofence. The
window is the same as Create Geofence with the same functionality, but it opens
prepopulated with coordinates, as shown in Figure 22.
 Save to file: Saves the list of geofences to a comma-separated values (CSV) file.
 Load from file: Loads geofences from a comma-separated values (CSV) file.
 Close: Closes the Geo Fencing Information window.
5.2.4
C
O
ALL
UT
In addition to normal tracking reports sent at a predefined interval, the SHOUT ns can also send
daily tracking reports at specific UTC times. These daily reports are called Call Outs. Call Outs
can be configured two ways: using AT commands and using SatTerm.
Call Outs configuration can be done using the following AT command: Add Call Out (^COA). Call
Outs' maintenance and modification can be accomplished using the following AT commands:
Delete Call Out (^COD), Erase Call Out (^COE), and Read Call Out (^COR).
To configure Call Outs with SatTerm, select Options > Call Out (see Figure 8); the Callout Form
window shown in Figure 24 appears. As long as there is at least one enabled entry in the list,
the Call Out feature is enabled.
The main portion of the Callout Form window has a list of existing Call Outs. The list displays
three columns: Index is the position of the Call Out in the list, UTC Time is the time a Call Out is
to be made (in HH:MM:SS format), and State indicates whether the Call Out is enabled (1) or
disabled (0). Below the Call Out list is a set of buttons. Descriptions of the buttons are as
follows:
 Add: Adds a Call Out to the list.
 Delete: Deletes the selected Call Out.
 Clear: Deletes all configured Call Outs.
 Close: Closes the Callout Form window.
Document Number: 451-01037-001D
SHOUT ns/nsx User Guide Version D
60 of 91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nal shout nsx

Table of Contents