Figure 13: General Profile Window With Led Tab - Iridium NAL SHOUT ns User Manual

 Power LED While Asleep (Normal and Emergency): The power
illumination modes when the device is asleep. While in tracking mode with emergency
active, the LED blinks rapidly (once every 2.5 seconds); otherwise, the LED blinks slowly
(once every 5 seconds). Using these settings, the emergency and normal behavior can
be turned on and off independently. If the emergency behavior is turned off, the device
returns to using the normal behavior.
 Power LED While Awake (Normal): While the power
the LED remains solid. Using this setting turns on and off this functionality.
 Emergency Awake LED Sequence: Sets whether to display the Emergency LED
Sequence. In this state, all six (6) LEDs blink simultaneously, at a one (1) second interval,
for as long as the emergency mode is active and the device is awake. If the emergency
behavior is turned off, the device returns to using the normal behavior.
 Iridium LED: Sets whether to display the Iridium (IRDM) LED. When enabled, the
Iridium LED stays solid when the Iridium signal strength is between 3–5 bars, blinks
Document Number: 451-01037-001D

Figure 13: General Profile Window with LED Tab

SHOUT ns/nsx User Guide Version D
LED has two
LED is awake in normal mode,
43 of 91