Configure The Shout Ns; Profile Descriptions - Iridium NAL SHOUT ns User Manual

Table of Contents

Advertisement

5 C
ONFIGURE THE
The SHOUT ns can be configured in one of three ways from a computer connected to the
SHOUT ns USB port: 1) manually through the SatTerm PC-based application (see section 5.2
Using SatTerm), 2) through a file download using SatTerm (see section 5.2.2.4 Configure
Settings), and 3) via AT commands (see section 4.2.1 Command Mode).
5.1
P
D
ROFILE
A profile is a group of user-modifiable settings saved to nonvolatile memory. There are three
types of profiles on the SHOUT ns: general profiles, tracking profiles, and additional setup
parameters (Other).
 General Profiles: General profiles contain settings that have a general impact on the
operation of the SHOUT ns (see General Profile Settings). There are two stored general
profiles numbered 0 and 1. In addition to the stored general profiles, there is an
"active" general profile, which is the set of general settings that are currently in effect.
o At power-up, by default, general profile 0 is loaded into the "active" general profile.
However, you can change the power-up profile using AT command &Y.
o After power-up, you can load the "active" general profile with any stored general
profile using the soft reset command Z.
o Alternatively, you can use &F to load factory default settings back into the "active"
general profile.
o Any modifications made to general profile settings apply to the "active" general
profile and are temporary. To save the modifications, write the "active" general
profile to one of the stored general profiles using &W.
o Settings that fall under general profiles can be displayed using &V.
 Tracking Profiles: Tracking profiles contain settings that have an impact on the SHOUT
ns during tracking mode (see Tracking Profile Settings). There are twelve stored
tracking profiles numbered from 0 to 11. In addition to the stored tracking profiles,
there is an "active" tracking profile, which is a temporary tracking profile for the
purpose of modifying a stored tracking profile. The "active" tracking profile is not used
Document Number: 451-01037-001D
SHOUT
NS
ESCRIPTIONS
SHOUT ns/nsx User Guide Version D
32 of 91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nal shout nsx

Table of Contents