Installation sequence
Installing the outdoor unit
Fig. 19
After positioning of the outdoor unit, check whether the
transport bracket is completely secured with an Allen
key (size 5).
Securing screw
, must be turned as far as it will go
A
to the left.
Positioning the indoor unit
Transport
!
Please note
Impacts, compression and tensile loads can
cause damage to the outside panels of the
appliance.
Never apply loads/weight to the top, front or
side panels of the appliance.
Requirements for the installation room
!
Please note
An unfavourable indoor environment can lead to
malfunctions and appliance damage.
■
The installation room must be dry and free
from the risk of frost.
■
Ensure ambient temperatures between
0 and 35 °C.
Max. 70 % relative humidity (corresponding to
■
an absolute humidity of approx. 25 g water
vapour/kg of dry air at 35 °C)
Danger
Dust, gases and vapours can be damaging to
health and trigger explosions.
Prevent dust, gases and vapours in the installa-
tion room.
32
(cont.)
A
WiFi operational reliability and system require-
ments
WiFi router system requirement
■
WiFi router with activated WiFi:
The WiFi router must be protected by a sufficiently
secure WPA2 password.
The WiFi router must always have the latest firm-
ware update.
Do not use unencrypted connections between the
heat generator and the WiFi router.
■
Internet connection with high availability:
Flat rate (flat rate tariff without restriction on time or
data volume)