Table of Contents
Advertisement
Aespire 7900
Disassemble the breathing system
2-8
The breathing system assembly can be disassembled for cleaning,
sterilization and part replacement.
1. Remove the breathing system and place on a flat surface.
2. Pull the latch to unlock the flow sensor module from the breathing
system.
3. Pull the flow sensor module from the breathing system.
4. Unscrew the sensor counterclockwise and remove it. To remove the
sensor cable from the breathing system, press on the connector button
(1) while pulling the connector out.
1
1009-0633-000
Advertisement
Table of Contents
