Table of Contents
Advertisement
Remove the AGSS receiver
1009-0633-000
3. Holding the rear handle (1) and the latch handle (2) as shown, slide the
breathing system onto the guide pins.
1
4. Use the grip under the latch handle to push the breathing system in fully
until it latches firmly.
5. Install the absorber canister and bag hose.
6. Before you use the system, complete the "Preoperative Tests" in section
4 of the User Reference Manual, Part 1.
The AGSS receiver may be removed for cleaning and sterilization.
1. On the back of the system, loosen the two thumbscrews (1) to release the
system side panel (2).
1
2 Cleaning and Sterilization
2
2
2-23
Advertisement
Table of Contents
